Products Description
The SPC eco-friendly flooring production line is made by extruding PVC base material through an extruder and then using a four-roll calendering machine to press and laminate PVC color film, PVC wear-resistant layer and PVC base film in one go to form the product. The process is simple and the lamination is completed by heat without any glue.
Advantages of SPC eco-friendly flooring production line
● Waterproof and moisture-proof. It has fundamentally solved the problem that wooden products are prone to rot, expand and deform after absorbing water and getting damp in damp and water-rich environments, and can be used in environments where traditional wooden products cannot be applied.
● Rich and diverse, with a wide range of colors to choose from. It not only has the natural wood feel and wood grain, but also can be customized in the desired color according to one’s own personality.
● High environmental protection, pollution-free, harmless and recyclable. The product contains no benzene or formaldehyde and is an environmentally friendly product. It can be recycled, which greatly saves the usage of wood and is in line with the national policy of sustainable development, benefiting society.
● High fire resistance. It can effectively resist fire, with a fire resistance rating of B1 grade. It self-extinguishes when exposed to fire and does not produce any toxic gases.
It is easy to install and convenient to construct, without the need for complicated construction techniques, thus saving installation time and costs.
It does not crack, expand or deform, requires no maintenance or upkeep, is easy to clean and saves on later repair and maintenance costs.
Component parts of SPC board/sheet production line:
| Item | Description Machine | Quantity | Note |
| 1 | Automatic screw feeding machine | 1 set | |
| 2 | SJSZ-90/188 type conical double-screw extruder | 1 set | Ouput:800kg/h |
| 3 | Die And Mould | 1 set | |
| 4 | Four-rollers calender machine | 1 set | |
| 5 | Constant temperature machine | 1 set | |
| 6 | Double-station unwinding system(Laminating device) | 1 set | |
| 7 | Cooling bracket device | 1 set | Length: 12m |
| 8 | Trimming device | 4 sets | |
| 9 | Traction device | 1 set | |
| 10 | Cutting device | 1 set | |
| 11 | Automatic stacking device(Mechanical aem) | 1 set | |
| Auxiliary Machine | |||
| 1 | Cooling/Heating mixing machine | 1 set | SRL-Z800/2000 |
| 2 | Crushing machine | 1 set | |
| 3 | Grinder machine | 1 set | |
Tags:
Technical parameter
Main technical parameter:
| Type | Product width | Product thickness | Main motor power | Capacity |
| 80/156 | 1050 mm | 3-8 mm | 75 kw | 400-500 kg/h |
| 92/188 | 1220 mm | 3-8 mm | 110 kw | 800-1000 kg/h |
| 110/200 | 1220 mm | 3-8 mm | 160 kw | 1200-1400 kg/h |
